WS12EX Position Sensor

Automated Control Engineering and ASM introduce the WS12EX rugged cable extension position sensor that has a measurement range up to 3 metres.

In locations where combustible dust is present, the maximum allowable surface temperature of installed devices is limited to only 2/3 of the minimum ignition temperature of the surrounding combustible dust. If there is a risk of dust accumulation, further considerations such as the smoldering point of the dust and additional temperature safety distances must be evaluated. The WS12EX series was developed to meet these safety requirements related to combustible dust.

• Housing rated IP67
• Industry standard analog outputs: 0-10VDC and 4-20mA
• Linearity: +/- 0.10 % (optional +/- 0.05 %)
• Precision potentiometer is utilized for the rotary sensing element.

The WS12EX series achieves the requirements of EX Dust Explosion-Proof, Zone 22 for non-conductive dust. The WS12EX series was designed for numerous industries where combustible dust is present: saw mills (saw dust), food processing (flour dust) and other harsh application (carbon dust).

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCi, STS, Weber, Vacon, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar, FEAS and TransTech.

For more information about the ASM WS12Ex position sensor please contact A.C.E. by email or via the A.C.E. website.

DC/DC converter series DCC90

Automated Control Engineering Group (A.C.E.) and FEAS now offer the shock and vibration resistant DC/DC converter series DCC90 for use under rough conditions.

The DCC90 converters are suitable for DIN rail or wall mounting and supply up to 120 W output power. The converters are usable in a temperature range of -30 to +70 ° C.

The DCC90 is designed for harsh environments with an epoxy resin casting, providing optimum protection against moisture and dirt.

FEAS provides versions for the input voltage range 18 to 40 V, 30 to 80 V and 70 to 155 V and output voltages of 12 V, 24 V and 48 V. The DCC90 converters are short circuit proof and overload- and open circuit protected.

Product information

• Extra low safety potential PELV (EN 50178), SELV (EN 60950)
• Output separated according to VDE 0551
• Overload and open circuit protected
• Short circuit proof
• Operating status shown by LED
• Suitable for the tropics - epoxy resin casted
• Safety acc. to VDE, EN, UL, CSA

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCi, STS, Weber, Vacon, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar, FEAS and TransTech.

For more information about the FEAS DCC90 please contact A.C.E. by email or via the A.C.E. website.

Weber vent-captor 3201.-

Automated Control Engineering (A.C.E.) and Weber introduce the vent-captor 3201.-. The 3201.-vent-captor is a solid state switching and monitoring device for use in industrial air handling applications.

The compact air flow monitor 3201.- is a self-contained switching device without any mechanical moving parts, that converts flow conditions into electrical switching signals. The 3201.- has been designed to be simply installed into any air flow application and perform reliably even under the harshest environmental conditions.

• Repeatable alarm
• Adjustable set-point
• Switching range: adjustable from 1 m/s to 10 m/s
• Medium temperature: -20 °C to +70 °C
• Temperature drift: < 0.5 % / K
• Universally applicable

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCi, STS, Weber, Vacon, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar, FEAS and TransTech.

For more information about the Weber vent-captor 3201.- please contact A.C.E. by email or via the A.C.E. website.