Monday, July 8, 2013

AMCI SD31045 Microstepping Stepper Motor Driver

Automated Control and AMCI introduce the SD31045 stepper motor driver. The compact and powerful SD31045 stepper motor driver is a market leader in the 4.5 amp current range. Incorporating a 310 Vdc motor supply bus, the SD31045 provides stepper motors with ample power for arduous applications. Readily accessible DIP switches are an integrated feature which enables easy motor current and micro stepping selection.

The SD31045 stepper drive incorporates a range of safety features. One of which is an interlock connection to prevent injury if the motor connector is removed while the driver is powered. Short circuit protection (phase to phase and phase to ground) and over temperature circuitry are two more of the protection features built into the AMCI driver.

AMCI stepper drives provide the ideal solution for machinery based applications when performance and reliability are critical.

  • Speeds up to 50 rps (3000 rpm)
  • 16 user selectable step resolutions up to 50,800
  • Input frequency up to 2MHz
  • 310 V bus
  • Outputs current up to 4.5 Arms, selectable in 0.1A increments
  • Automatic current reduction
  • User-selectable current loop gain for performance fine tuning
If you would like more information about the AMCI stepper motor drive please click here

GSM communication module for data loggers

Automated Control and STS introduce the GSM communication module for its range of data loggers. The GSM is a reliable and durable communication module that can be used to assist in the continuous monitoring of ground and surface waters.

The GSM module is constructed with a chromate conversion coated aluminium housing and incorporates stainless steel ports to ensure its long term durability in the field. The module also combines a temperature compensated real time clock to ensure accurate time and date stamping throughout the year.

The GSM can easily transfer data directly to an office based computer, or if preferred, to a mobile device via SMS.
  •  Operating temperature: -20…55 °C
  •  Data transfer: GSM
  •  Frequency band: 900, 1800/1900 MHz (Triband)
  •  Materials: Aluminium (Housing)
  •  Feature: Battery operation
  •  Readout time: 36s/1000 measurement values
Fore more infromation about the STS GSM please click here. 

Thursday, May 16, 2013

Tape Extension Sensor for cost-sensitive applications

Automated Control and ASM launch the new WB61 Tape Extension Sensor that provides up to 4000mm measuring length in a compact, industrial housing. ASM Tape Extension Sensors have been designed to operate in harsh conditions, making them a perfect choice for installation on cranes, excavators, forklifts and access platforms.

Due to the design of the sensor and the inherent strength of the stainless steel tape, the WB61 range of sensors can be found in environments and upon applications where other traditional pull-wire sensors struggle to survive. The durability of the extension tape allows for the reliable use of directional changing pulleys and also within applications where icing may occur. These features make the sensor ideal for safety critical control functions within the mobile equipment market.
  • Housing manufactured from composite and stainless steel components
  • Rugged sensor that meets the sealing level of IP67/69K
  • Choice of three analogue and three digital outputs (SSI, CANopen or CAN J1939)
  • Linearity of +/- 0.10% with the option of redundant outputs

Automated Control specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. Automated Control prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.

Contact Automated Control for more information | EMAIL or WEBSITE

Monday, April 29, 2013

SNT12524-K Switch mode power supply

Automated Control and FEAS introduce the SNT12524-K switch mode power supply. The SNT125 range of power supplies are robust devices that deliver a consistent source of power to voltage sensitive loads, even in harsh industrial environments.

The SNT12425-K’s reliability is a result of using the latest in construction techniques. These unique manufacturing methods result in a power supply that has exceptionally low radio emissions. The short circuit proof DC output voltage can easily be adjusted from 22.5 to 30.0 V to suit a variety of applications. To enhance its temperature and vibration characteristics, the SNT12524-K’s circuitry is completely embedded in resin and is housed within an aluminium, wall mountable case.

The output voltage can be increased up to 120% of the nominal value for an extended period of time, which makes this power supply optimal suited for loads requiring high starting currents. The adjustable current limit guarantees optimal protection of the connected load.
  • Input range: 85 - 270 V or 120 - 400V AC DC
  • Output range: 10.0 - 15.5 VDC
  • Boost-Function: 120% max. 5min.
  • Device protection, shutdown on over-temperature and automatic restart
  • Parallel operation possible, polarity reversal protection, short circuit proof, overload and open circuit protected
  • Vibration proof, suitable for tropical applications - epoxy resin casted
  • Output separated according to VDE0551
  • Conforms to EMC and low voltage directive
  • PFC according to IEC/EN 61000-3-2
  • Safety according to VDE, EN, UL, CSA
Automated Control specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. Automated Control prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.

Contact Automated Control about the FEAS SNT125 Series | Website | Email.

Thursday, March 21, 2013

Digital Panel Process Indicator - West 8010+

Automated Control and West introduce the 8010+ digital panel process indicator. The West 8010+ provides a high contrast, high visibility display. The indicator is designed for optimal ease of use in a wide variety of temperature and process applications.

The 8010+ provides a jumper-less configuration, plug-in output boards and an efficient PC configurator for quick and simple setup.  In addition, plug-in modules allow retransmission of the process variable, a designated transmitter power supply or up to 4 alarm relays (latching or non-latching).

The instrument provides a user selectable dual color display option with fixed red or green displays or a green to red color change when an alarm condition occurs.
  • Up to 5 outputs
  • Plug-in output modules for SSR driver, triac, relay and linear outputs – easily field changeable
  • Self-recognition of option boards – promotes simple, error free set-up
  • Optional alarms relays are selectable as latching or non-latching.
  • 10V SSR driver output allows for the drive of up to 3 typical SSR/SCR inputs
  • PC Configurator with easy to use ‘wizard’ that suits both novice and experienced users
  • Jumper-less configuration
  • Modbus and ASCII Communications
  • Multi-point scaling and tare features are included as standard
Automated Control specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. Automated Control prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.

For more information about the West 8010+ Digital Panel Process Indicator please contact Automated Control by email or via the Automated Control Website.

Wednesday, March 6, 2013

Digital pressure transmitters

Automated Control and STS introduce the DTM digital pressure transmitter. The DTM is a reliable and compact unit with robust stainless steel assembly, incorporating a piezo-resistive measuring element.
The DTM is suitable for all pressure ranges between 0...50 mbar and -1...1000 bar, with calibration available for all common pressure units. It is available in gauge, absolute or sealed gauge configurations.

The DTM is reverse polarity and short circuit protected and can with stand media temperature up to 150°C.

Key features include:
  • Pressure measuring range: 100 mbar…1000 bar
  • Accuracy: ≤ ± 0.25 / 0.10 % FS
  • Operating temperature: -25…85 °C
  • Process temperature: -40…150 °C
  • Interface: RS232, RS485
  • Materials: Stainless steel, Titanium

Automated Control specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. Automated Control prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.

For more information about the STS DTM Digital Pressure Transmitter please contact Automated Control by Email or via the Automated Control Website

Thursday, February 14, 2013

PMIS4/PMIR5: New magnetic measuring system for rotary applications

Incremental encoder PMIS4/PMIR5 best for difficult applications

Automated Control and ASM extends the magnetic POSIROT® position sensors range to the combination PMIS4/PMIR5, developed specifically for rotary applications. The advantages of this combination are high EMC protection, large guiding distance tolerance and a superior signal performance up to 327,680 pulses/360°.

The incremental, non-contact measuring system consists of the sensor head PMIS4 and an incremental magnetic ring PMIR5. The sensor head is made of a fully enclosed, shielded metal housing. It offers high protection against electromagnetic interference, thermal overload and has a protection class of IP67.

The PMIR5 magnetic ring comes in three sizes with flange sizes of 83, 133 or 233 mm. They are available with decadic, binary or degree division and reach corresponding 131,072 pulses / 360°, 196,608 pulses / 360° or 327,680 pulses / 360°. Since the system operates magnetically, it is unaffected by contamination from oil and dust. For this reason it is suitable for use in harsh, dusty industrial environments.
  • All metal housing
  • Protection class IP67
  • Highest EMC protection
  • Large guiding distance of ±1mm
  • Temperature range -40 °C to +85 °C
  • Maximum pulse frequency  480 kHz
  • Up to 327,680 pulses/360°

Automated Control specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. Automated Control prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.

For more information about the ASM  PMIS4/PMIR5 contact Automated Control by email or via the Automated Control Website.


Wednesday, January 23, 2013

FEAS RZM01-30 Redundancy Module

Automated Control and FEAS introduce the RZM01-30 Redundancy Module for critical power supply applications that cannot tolerate a power failure under any circumstances.

The RZM01-30 has been designed with an additional cooling element and reverse voltage protection as an additional safeguard. The Redundancy Module is vibration proof and epoxy resin casted to ensure that it is a reliable solution, even in the harshest of environments.

The Redundancy Module RZM01-30 provides simple DIN rail mounting and it conforms to EMC and low voltage directives.

•    Voltage range: 5.0-50 VDC
•    Input current: 2x 15 A
•    Output current: 1x 30 A
•    Operating temperature range: -40°C / +80°C
•    Mounting: on rails acc. to DIN 46277
•    Dimensions (WxHxD): 40.0 x 99.0 x 118.0 mm
•    Weight: 0.68 kg

Automated Control specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. Automated Control prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.

For more information about the FEAS RZM01-30 Redundancy Module, please contact Automated Control via our website or by email.