ASM WB25 tape extension position sensor

Automated Control and ASM have expanded the range of tape extension position sensors, with the introduction of the WB25 series.

The WB25’s highly flexible measurement tape is constructed out of a high grade stainless steel material that is 10 mm wide with only a 0.08 mm thickness. Due to its very smooth surface, the risk of icing is reduced. An integral tape dust wiper automatically cleans the tape as it is being retracted into the housing.

The angular sensing element consists of a magnetic encoder which translates the linear motion into an electrical signal. This extremely reliable magnetic encoder is highly shock and vibration resistant. This allows it to function under demanding environmental conditions. The rugged construction of the WB25 series provides for a long-life even under harsh operating conditions such as those found in off-highway vehicles and construction equipment. The space saving stainless tape design provides a small housing foot print with long measurement ranges

• Standard IP64 enclosure rating (optional IP67 available)
• Analog outputs: 0.5-10V, 0.5-4.5 and 4-20 mA
• Digital outputs: CANopen, CAN SAE J1939 and SSI protocols
• Linearity: +/- 0.05%
• Measurement ranges: 12m, 15m, 20m and 25m
• Compact housing        

Automated Control specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.

For more information about the ASM tape extension position sensors WB25 series please contact Automated Control by email or via the Automated Control website.

STS ATM.1ST/T analogue pressure and temperature transmitter

Automated Control and STS introduce the newly released  ATM.1ST/T and ATM.1ST/N/T analogue pressure and temperature transmitters for highly dynamic measurements.

With the advantage of a combined pressure and temperature sensors the ATM.1ST/Thttp://www.aceg.com.au/page14970/STSProductPage.aspx#STS%20ATM.1ST/T%20analogue%20pressure%20and%20temperature%20transmitter is very well-suited for a wide range of demanding applications that require reliable and accurate measurements.

Both the pressure and temperature process functions are contained in one elastomer-free process connection (i.e. all connections are welded). This means that the temperature sensor is located in the medium.

• Pressure measuring range: 100 mbar…25 bar
• Accuracy: ≤ ± 0.25 / 0.10 % FS
• Temperature measuring range: -50…150 °C
• Operating temperature: -40…125 °C
• Process temperature: -50…150 °C
• Output signal: 4…20 mA
• Materials: Stainless steel

Automated Control specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.

For more information about the STS ATM.1ST/T analogue pressure and temperature transmitter please contact Automated Control by email or via the Automated Control website.

AR62/ 63 - THE ROBUST ENCODER FOR ALL ENVIRONMENTAL CONDITIONS!

Automated Control and Hengstler introduce the heavy duty absolute encoder AR 62/63. The special features of the AR62/ 63 not only comprise of its particularly rugged enclosure, but also generously dimensioned, rigid ball-bearings.

The AR62/ 63 is designed to easily withstands highest accelerations, extreme climatic fluctuations and even underwater operation. In this way, the rugged absolute encoder is ideally suitable for applications in wind farms, marine or utility vehicle applications, as well as for use in presses or wood and stone processing machinery: applications where high resistance to harsh environments and maximum reliability are required at the same time.

• Single -and multi turn: Resolution up to 28 Bit
• Wearless electronic multi turn: contact and battery less
• Available interfaces are SSI, BiSS, CANopen and Analogue (0 ... 10 V or 4 ... 20 mA)
• 300 N axial and radial load
• 200 g shock resistance/ 20 g vibration resistance
• Submersible: Protection class up to IP69K
• High temperature range: -40 ... +100°C
• Compact design: 32 mm mounting depth
• Option: Stainless steel housing

Automated Control Pty Ltd specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.

For more information about the Hengstler heavy duty absolute encoder AR 62/63 please contact us by email or via the Automated Control website.

FEAS GSNT90 Switch Mode Power Supply

Automated Control Engineering Group (A.C.E.) and FEAS introduce the GSNT90 switch mode power supply. The GSNT90 comes with nominal output voltages of 12VDC, 24VDC or 48VDC.

The GSNT90 is suitable for harsh environments, even with high humidity, dirtiness or heavy vibrations the FEAS GSNT90 power supply ensures the safe and reliable operation of your system and machine.

Installation is quick and easy for both indoor and outdoor applications.

• IP68
• Output separated according to VDE0551
• Extra low safety potential
• Overload and open-circuit protected
• Short circuit proof
• Reverse voltage protection at the output
• Epoxy resin casted

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information about the FEAS GSNT90 Switch Mode Power Supply please contact A.C.E. by email or via the A.C.E. website.

2400 - 2500 Inductive Proximity Switch - Weber Sensors

Automated Control Engineering (A.C.E.) and Weber introduce the 2400-2500 inductive proximity switch. The proximity switch has large detection distance and is designed for use in harsh industrial environments.

Proxi-captor type 2500.-- and its coil have been especially conceived for application in environments where normal proximity switches are restricted by the presence of surrounding machinery. The self-adjusting property of this system assures constant oscillation under all working conditions, thus the units adjust themselves to their environment automatically whilst keeping their operating condition constant with changing temperatures.

For applications which require an adjustable switching range, proxi-captor type 2400.-- has been constructed to allow adjustment by means of a potentiometer.

• Remote inductive proximity switch
• Available in switching or analogue versions
• Completely encapsulated
• No moving parts
• Rugged aluminium housing

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCi, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar, FEAS and TransTech.

For more information about the Weber 2400 - 2500 Inductive Proximity Switch please contact A.C.E. by email or via the A.C.E. website.

STS ATM/F/Ex Intrinsically safe flange pressure transmitters

Automated Control Engineering (A.C.E.) and STS introduce the ATM/F/Ex intrinsically safe flange pressure transmitter. This pressure transmitter is designed for use in hazardous areas.

The ATM/F/Ex is compact and has a robust stainless steel assembly. The pressure transmitter uses a piezoresistive measuring element and calibration is available for all common pressure units. 

The ATM/F/Ex is both reverse polarity and short circuit protected. The pressure transmitter also has an option for surge (lightning) protection according to EN 61000-4-5.

• Pressure measuring range: 100 mbar…25 bar
• Accuracy: ≤ ± 0.50 / 0.25 / 0.10 % FS
• Operating temperature: -25…85 °C
• Process temperature: -25…100 °C
• Output signal: 4…20 mA
• Materials: Stainless steel

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information about the STS ATM/F/Ex Intrinsically safe flange pressure transmitter please contact A.C.E. by email or via the A.C.E. website.

DC425 Absolute Multi-turn Analog Rotary Shaft Encoder

Automated Control Engineering (A.C.E.) and AMCI introduce the DC425 DuraCoder. The DC425 is an absolute analog multi-turn rotary shaft encoder, offering an analog current or analog voltage output over single or multiple turns.

The DC425 features an IP67 rated aluminum housing, 5/8" stainless steel shaft, and resolver-based sensing technology.

The absolute analog multi-turn rotary shaft encoder performs efficiently in environments of continuous mechanical shock and vibrations, and exposure to air and liquid-borne contaminants.

• IP67 rated; superior durability in harsh environments
• 5/8" stainless steel shaft
• Aluminium housing
• Ideal for high-shock applications - withstands mechanical shock & vibration

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCi, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar, FEAS and TransTech.

For more information about the AMCI DC425 Absolute Multi-turn Analog Rotary Shaft Encoder please contact A.C.E. by email or via the A.C.E. website.