PCST27 rod-profile sensor

Automated Control is excited to announce that ASM has extended its range of magnetostrictive position sensors with the new PCST27 series. The PCST27 offers high-precision, fail-safe measurement on hydraulic cylinders and fluid levels in extreme environments.

The robust probe sensors allow for precise positioning of hydraulic cylinders or the measurement of fluid levels. The models in the PCST27 series have proven their superior reliability, even after years of use under the most extreme conditions.

As with all models in the POSICHRON® PCST27 series, the sensors consist of a magnetostrictive waveguide and a movable position magnet. Based on magnetically generated density waves and the measurement of time pulses, this measurement principle is ideal for applications that demand extreme precision and repeatability.

• Resistance against environmental factors such as vibration, humidity or shock
• Sea water resistant stainless steel housing
• Non-contact measurement technology
• Available up to protection class IP68
• Pressure resistant up to 15 bar
• Absolute output linearity up to +/- 0.02% full scale
• Measurement lengths from 0 to 100 or from 0 to 5,750 mm

Automated Control specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. Automated Control prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.

For more information about the ASM PCST27 rod-profile sensor please contact Automated Control by email or via the Automated Control Website.

Hengstler Acuro XR now with DNV certification

Automated Control and Hengstler now offer the robust AR-series encoders that meet the requirements of harsh environments.

This family of magnetic absolute encoders is resistant to the high temperature range of -40 to+100°C, high mechanical loads of up to 300 N axial and radial load and can withstand up to 400 g shock and 20 g vibration. The AR62/63 also has the highest protection category of up to IP69K.

With DNV certification for the maritime industry, the compact AR-Series is the best solution for offshore and marine applications. Additionally, the AR-series is used worldwide within wind turbine applications.

Key features include:

• Resistant to high temperature range of -40 to+100°C
• High mechanical loads of up to 300 N axial and radial load
• Can withstand up to 400 g shock
• Can withstand up to 20 g vibration.
• Highest protection category up to IP69K

Automated Control specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. Automated Control prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.

For more information about the Hengstler products now with DNV certification please contact Automated Control by email or via the Automated Control website.

SMD23E 3-in-1 integrated motion control package with Ethernet communication

Automated Control is now distributing AMCI's SMD23E Size 23 Integrated Stepper Motor, Drive, and Indexer package with Ethernet interface. The SMD23E is a self-contained motion control product that is easy to install while delivering best in class performance.

AMCI’s new SMD23E integrates a stepper motor, drive, and controller into one compact package, with an optional encoder available for move verification. The built-in Ethernet interface simplifies connectivity to the host controller (PLC or PAC) using standard RJ45 connectors and CAT5/6 cabling.

The SMD23E provides an unsurpassed speed range with excellent high torque stepper motion control, and delivers exceptional performance across a range of applications. Examples of such applications include conveyors, bottle capping, feeders, cut-to-length, package sorting, pick and place, and form, fill and seal.

Stepper Motor/Drive/Controller Features:

• Stepper Motor + Drive + Indexer integrated for optimum performance
• Ethernet Interface (EtherNet/IP + Modbus TCP)
• Programs using your host controller's software - nothing new to learn!
• High-torque, NEMA frame size 23 stepper motor
• Powerful 3.4 amp, DC-powered microstepping drive
• Anti-resonance circuitry ensures smooth performance at any speed
• Space saving design that simplifies installation and reduces wiring

Automated Control Pty Ltd specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. Automated Control prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.


For more information about the AMCI SMD23E Integrated Stepper Motor, Drive and Indexer package with Ethernet interface, please contact Automated Control by email or via the Automated Control Website.

WB100M: Robust tape extension position sensor

Automated Control and ASM introduce the new WB100M tape extension position sensor. The WB100M has been designed to measure reliably under extreme offshore conditions. It is highly resistant to shock and operational to IP68/69K in sea water.

The WB100M series of sensors exceeds all expectations when used in areas of difficult access and pulley wheels are used to change the direction of the tape route. On conventional draw wire sensors the use of these pulleys can considerably reduce the life of the draw wire. But with the WB100M, the stainless steel measurement tape will have at least double the life compared to that of a measurement cable under identical operating conditions.

Developed primarily for offshore oil drilling rigs and outdoor applications, the WB100M is well suited to wet, harsh applications often found in dock sites such as cranes and ramp positions or even sluice gates found on inland waterway systems.

The fully encapsulated electronics ensure that no moisture can penetrate the critical areas where as water is allowed to freely flow through the mechanical areas with no effect due to the use of materials specifically selected to work well in a salt water environment.

• Available in measuring lengths from 2000mm up to 10000mm
• A wide range of analog or digital outputs including CAN SAE J1939
• Linearity is rated up to +/- 0.05% full scale
• IP68/69K enclosure ratings
• Measuring tape principle ensures long operating life
• Shock resistant

Automated Control specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. Automated Control prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.

For more information about the ASM WB100M robust tape extension position sensor please contact Automated Control by email or via the Automated Control website.

Electronic Flow-switch 4140.13

Automated Control and Weber introduce the new electronic flow-switch flow-captor 4140.13.   The flow-captor 4140.13 is a highly precise, compact, industrial flow switch.

The 4140.13’s operation is based upon a new calorimetric principle. The factory-set switch-point enables easy installation.

• Fixed switch-point factory-set
• Easy Set-up
• Inexpensive and reliable
• For liquid and pasty media
• No moving parts
• LED display of switching state
• Compact and robust
• Maintenance-free
• ISO 9001 : 2008

Automated Control specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. Automated Control prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.

For more information about the Weber 4140.13 Electronic Flow-switch please contact Automated Control by email or via the Automated Control website.

Motor motion controller MSM3 FEAS

Automated Control and FEAS introduce the MSM3 motor motion controller.

The MSM3 is suitable for harsh environments, even environments with high humidity, dirtiness or heavy vibrations. The FEAS MSM3 is fully epoxy resin casted ensuring the safe and reliable operation of your system or machine.

• Standstill recognition without tacho alternator
• Suitable for the most AC and DC motors
• Continuous monitoring of running motor
• High input sensitivity
• Digital analysis logic
• Utilizable as voltage detector
• Max. input DC voltage: 600 volts
• Max. input AC voltage 550 volts

Automated Control Pty Ltd specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. Automated Control prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.

For more information about the FEAS MSM3 motor motion controller please contact Automated Control by email or via the Automated Control website.

H25 Single-Turn Stainless Steel Resolver Transducer

Automated Control and AMCI introduce the H25 Resolver Transducer.  The corrosion resistant construction and high temperature rating of AMCI’s H25 stainless steel resolver transducer allows it to be used in environments where most sensors fail.

Demanding applications such as paper mills, steel mills, and mining operations are the inspiration for this extreme-duty rotary sensor.

• 304 Stainless Steel Housing & Shaft
• High Temperature Rating of up to 150°C (302°F)
• IP67 Rated; Superior Durability
• Ideal for High-Shock Environments

Automated Control specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. Automated Control prides itself on being able to supply the client with an exclusive range of products from major international suppliers which includes AMCI, STS, Weber, Pepperl + Fuchs, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Rittmeyer, Pulsar and FEAS.

For more information about the AMCI H25 Single-Turn Stainless Steel Resolver Transducer please contact Automated Control by email or via the Automated Control website.