New MEMS-Based Tilt Sensor POSITILT® - ASM PTAM2

ASM and Automated Control Engineering (ACE) introduce a new, innovative tilt sensor series, PTAM2, with ranges from ±5° to ±180° for single axis and from ±5° to ±60° for dual axes in a robust, IP67/IP69K rated all-metal housing. This industrial grade sensor provides a high resolution, linear output signal that is proportional to the inclination angle. The PTAM2 series has been tested to withstand harsh conditions which makes it suitable for a wide range of applications such as factory automation machines, robotics, mobile cranes, draw bridges, adjustable platforms and off-highway construction equipment.

The PTAM2 series is the latest addition to the POSITILT® family and is available with four different absolute analog outputs: 0.5-10V, 4-20mA, voltage sine(x) and CANopen with a typical resolution of 0.05°. Limit switch outputs are also available. The output signal response time is available from 0.1 – 2.0 seconds, in 0.1 second increments. The measurement ranges are available from ±5° to ±180° in 5° increments. The compact 36 mm (1.4 inch) diameter housing with servo flange mounting allows for quick and easy installation.

Since the PTAM2 is based upon non-contact and therefore wear-free, MEMS position sensor technology, it offers significantly increased reliability in extreme environments, especially under high mechanical shock conditions.

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information about the ASM PTAM2 or other products supplied by A.C.E. please contact A.C.E. via the website or email.

Pepperl+Fuchs - High-Temperature Sensor Cordsets and Cables

Automated Control Engineering (ACE) introduce the new Pepperl+Fuchs cables and cordsets for high-temperature environments. With improved resistance to weld slag, the cables can handle temperature ranges of -40 degrees C up to +150 degrees C for extended time periods of up to 3000 hours.

The cables and cordsets are constructed of a TPE class jacket material and a temperature resistant conductor insulation material (ETFE). This provides temperature resistance at the jacket, and at the conductor insulation levels. They are resistant to temperature, weather, fuels, oils, and abrasion.

Many industrial applications are high temperature applications (welding, paint drying ovens, etc) and they require cables and cordsets that can withstand extreme temperatures. These new high temperature products from Pepperl+Fuchs can provide the solution.

Product Features:

• Models available in all standard 4-wire configurations
  o M12 (V1) & M8 (V3)
  o Single ended & extension


• Cable material TPE
  o Temperature rating: -40 degrees C to +150 degrees C
  o +150 degrees C for 3000 Hrs


• Connector material TPU
  o Temperature rating: -40 degrees C to +90 degrees C


• Cable/Connector
  o 22 AWG, (0.32 mm2), 19 strand
  o IP68/IP69 rated
  

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information please contact A.C.E. via the A.C.E. website or via email.

Incremental Encoder RI 64

Automated Control Engineering Group (A.C.E.) and Hengstler introduce the new incremental encoder RI64. The RI64 has a robust design making it high shock and vibration resistant. The incremental encoder is commonly used for feedback in asynchronous motors and industrial applications.

The RI64 incremental encoder is available in two shaft types; through hollow shaft and hubshaft, with shaft diameters up to 16 mm. The shafts are electrically insulated, which provides protection from shaft currents.

The protection class of the incremental encoders is IP64 or IP67 and they have a high temperature range of -40°C ... + 100°C. The RI64 has a maximum pulse frequency of 300 kHz and provide a PPR of up to 5000.

• Housing diameter 63 mm
• Weight approx. 180 g
• IP64 or IP67 protection class
• 100 m/s² vibration resistance
• 1000 m/s² shock resistance
• Operating temperature -40 °C ... +100 °C
• Max. pulse frequency 300 kHz
• Number of pulses 1 ... 5000
• Supply voltage DC 5 V ±10 % DC 5 - 26 V

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information please contact A.C.E. via the website or email.

The new rules for efficiency: ProVU - One controller, two control loops.

Automated Control Engineering (A.C.E.) and WEST introduce a new economic two-in-one concept, the new generation of the ProVU temperature and industrial controller. The controller now comes with extended functionality; with two independent control loops in one unit, making the ProVU a particularly efficient solution for industrial processes.

The ProVU temperature and industrial controller features a versatile programmer with 2 profiles, enabling 64 different programs with 255 segments to be stored in the unit. Examples of application areas for the compact controller are climatic chambers, autoclaves, and industrial furnaces.

Thanks to the additional control loops and the comprehensive control & monitoring functions, fewer individual controllers will be required for demanding applications. In this way, the ProVU cuts hardware and installation costs.

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information please contact A.C.E.

AMCI EXPANDS SELECTION OF SIZE 11 RESOLVERS

Automated Control Engineering Group (A.C.E.) and AMCI announces recent mechanical advancements made to the R11 (size 11 resolvers) that increase reliability and maximize equipment uptime.

Available with over 50 different configurations, AMCI’s industry standard size 11 resolvers are easily crossed as direct replacement resolvers in a number of applications. The new advancements offer expanded selection and compatibility for OEM, military and other applications, including radiation hardened, submersible, and gearhead units.

AMCI can customize any R11 resolver for OEM and large volume customers. Customizations include:

• Shaft Details (length, width, flats, etc.)
• Wiring (lead length, wire type, and termination)
• Mechanical (mounting options, custom bodies, environmental sealing to IP67)
• Radiation Hardened
• Gearhead Units
• Submersible
• Electrical Characteristics

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

Email the A.C.E. staff for more information or visit the A.C.E. website.

ASM PMIR7 & PMIS4 Incremental Magnetic Ring Encoder

Automated Control Engineering Group (A.C.E.) and ASM announce the addition of new magnetic encoder rings, PMIR7 & PMIS4 series, to the POSIROT® family. These incremental encoder magnetic rings are available in three sizes to accommodate different shaft sizes and yield up to 184,320 pulses per revolution in conjunction with the quadrature encoder read head, PMIS4 series. Both units were designed to operate in harsh environments.

This non-contact incremental encoder system consists of a magnetoresistive read head, PMIS4, and a dual channel magnetic ring, PMIR7. The sensor head is completely enclosed in a metal housing and generates the industry standard A, B, Z output pulses for quadrature detection with reference mark. The PMIR7 magnetic rings come in three sizes that can be quickly press-fitted onto 27, 35 or 50 mm shaft diameters. This precise and robust encoder system can generate up to 184,320 pulses per revolution. The side tracking tolerance of this magnetic encoder is +/- 1 mm.

The shielded metal housing of the compact PMIS4 sensor read head offers a high level of protection against EMC interference and thermal overload. The enclosure has an IP67 rating to protect against dirty environments. Since this encoder operates magnetically, the read head still functions even when the magnetic scale is operated in dirty industrial environments with contamination such as oil and dust.

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information please contact A.C.E. via the A.C.E. website or email.

Hiquel in-Case series

Automated Control Engineering Group (A.C.E.) and Hiquel introduce the latest solution for complex control requirements with the new in-Case series. The in-Case series provides an integrated range of Industrial Monitoring and Timing relays in a new, compact 22.5mm DIN rail case.

Designed with the emphasis on flexibility and incorporating a new micro-controller, just four monitoring relays offer a complete range featuring single phase current and voltage, three phase voltage, and Thermistor monitoring, with all popular function variants, combinations and options selected by DIP switches.

Hiquel's new custom IC means that just three Timing relays offer all standard timing functions and incorporate special features such as dual timing functions and elapsed time indication. As a result, users will benefit from lower stock investment and faster deliveries.

Features:

• LED status indication
• Easy to set parameters
• Configuration DIP switches
• Special angled terminal box
• Space saving design
• Manual reset button

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For More infromation please contact A.C.E. via their website or email A.C.E.

Weber Mini Vent-Captor 3505/3022.30

Automated Control Engineering Group (A.C.E.) and weber Sensors introduce the new mini vent-captor to the Australian medical industry. The new mini vent-captor type 3505 / 3022.30 is a remote air flow meter for industrial applications, ideal for small pipe sizes from ID 10 to 15 mm. The measurement of the flow is based upon the calorimetric principle. The vent-captor is completely resin encapsulated, thus rugged, shock and vibration proof.

• Small pipe diameters
• Ideally suited to small flow volume
• Temperature compensated
• Compact, no additional parts
• Linear current output 4 -20 mA
• LED - output display
• Rugged industrial version
• ISO 9000 : 2001 certified manufacturing

With a strong history in development of sensors for the medical industry, weber Sensors has developed sensors, such as the mini vent-captor type 3505 / 3022.30, that can measure and document the consumption of medical gases, specifically in the ETAK and the central feed line.

The flow rate in the ETAK is about 50 m/s means 400 ni/min (on request a higher flow rate is possible) with a pipe inner diameter of 13 mm. With bigger pipe sizes weber Sensors installs the inline vent-captor units that cover the measuring range of 0 m/s up to 80 m/s, in reference to normal atmospheric pressure.

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

Powerful and Robust Switch-mode Power Supply – FEAS SNT230-K Series

Automated Control Engineering Group (A.C.E.) and FEAS are excited about the popularity of the SNT230-K series. The switch-mode power supplies of the FEAS SNT230-K series are powerful and robust devices to power sensitive loads in a hard industrial environment. These features result from the modern construction with superior radio shielding and high reliability integrated into a functional and stable casing.

The SNT230-K series power supply is optimally suited for loads requiring high starting currents. The short circuit proof output DC voltage of this type can be adjusted from 22.4 to 29.6V. The SNT230-K series use a full-bridge push-pull converter which generates a symmetric output voltage.

Features:

• Output separated according to VDE 0551
• Extra low safety potential PELV (EN 60204), SELV (EN 60950)
• Overload and open circuit protected
• Short circuit proof
• Operating status shown by LED
• Parallel connection possible
• Suitable for the tropics - epoxy resin casted
• Safety acc. to VDE, EN, UL, CSA
• Runs in 2-phase-operation without performance reduction

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information about the FEAS SNT230-K Series please contact A.C.E. via the website or email.

WEST eCAL 1/8 DIN Controller - Functional, cost-effective, and even more compact

WEST and Automated Control Engineering Group (A.C.E.) announce the extension of the eCAL controller range. The newest addition to the range is a powerful standard controller in the 1/8 DIN (98 x 48 mm) format.

The new eCAL controller shows its strength as a cost-effective and compact solution with improved aesthetic design, a reduced behind panel depth of 70mm and capability expected from higher end products. This includes a universal input for all sensor types allowing flexible utilisation, 2 or 3 outputs (including relay, SSR driver, linear DC and RS485), full PID control and a simple user interface with easy to read LED display consisting of 4 digits upper and lower, 4 button membrane keypad including function button that can be configured for auto/manual, tuning or profiler control and 3 output status LEDs.

Typical application areas for eCAL are smaller laboratory and industrial furnaces, incubators, and sterilizers.

• UL certification - available for the whole family of eCAL controllers
• Universal Input – one controller for all sensor types
• 70mm behind panel depth for easy installation – also ideal for retrofit
• Programmer function for applications requiring control with moving setpoint

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information about the new WEST eCAL 1/8 DIN Controllers please click here to contact A.C.E or email A.C.E. - sales@aceg.com.au

STS Sub-sea and Offshore Pressure Monitoring

The Sub-sea and Offshore markets offer a challenge for product specification with customers requiring high-end products. The requirements for such products are far from a standard pressure transmitter. These products are often required to be customizable and have highly robust construction.

The new products offered by STS have been designed especially for the Sub-sea and Offshore markets. STS has extensive experience in supplying the sub-sea industry, using their knowledge and experience to create this highly functional range of products, with specific industry requirements.

All the products from STS in the Sub-sea and Offshore range are certified (ATEX, FM, CSA, etc.). The range has constructions for pressure sensing up to: 1817 bar (26,350 psi), overpressure rating up to: 2272 bar (33,000 psi) and can handle applications with ambient pressure up to: 384 bar (5,570 psi).

Providing instruments in offshore and sub-sea applications requires specially designed parts and also test procedures to guarantee the expected quality standard and life time. STS can provide customers with special parts, test procedures and required accessories.

STS can offer the following for customized products:

• Special procedures for functional controls
• Up to 16 pins glass-to-metal seal
• Tools for hyperbaric testing
• Welding analysis
• Customized markings
• Special cable sleeves
• Customer specific pressure connections / constructions
• Sensing of different parameters: pressure, water detection, etc.

For more information about the STS subsea and offshore range of pressure monitoring products please contact A.C.E. or email our sales staff - sales@aceg.com.au

New MEMS-based Inclinometer with Linear Output

Automated Control Engineering Group (A.C.E.) and ASM announces the PTAM27L series, a new inclinometer based upon MEMS technology for single and dual axis tilt angle measurement. The compact, flat housing was designed for applications where space is critical. For single axis versions, the measurement ranges span from +/-15° to +/- 180°, in increments of 15°. For dual axis versions, the measurement ranges span from +/-15° to +/- 60°, in increments of 15°.

The PTAM27L series is an extension of the POSITILT® family of MEMS based inclinometers. This wear-free sensing technology offers high resolution and is shock resistant. The housing is rated IP64 and with a height of only 10mm, the PTAM27L can be easily installed into the tightest locations.

Several analog outputs with the corresponding excitation voltages are available:

• U2L = 0.5…10 V with 18…36 VDC
• U6L = 0.5…4.5 V with 5 V DC ±5% (ratiometric)
• U8L = 0.5…4.5 V with 10…36 VDC
• I1L = 4…20 mA with 18…36 VDC

The PTAM27L offers 0.1° resolution, +/-1° linearity and +/- 100 x 10-6/ C° temperature stability. The operating temperature range is 0 to 60 C° full scale.

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information please contact A.C.E. or visit the A.C.E. website.

The KS 98-1 Engineering package – all-in-one

Automated Control Engineering Group (A.C.E.) and WEST present the new KS98-1 Engineering Package. With its compact design and freely configurable functions, the KS 98-1 provides flexible solutions for complex process control tasks.

The KS98-1 enhances process control task by offering a comprehensive function library – from analog signal conditioning through digital signal processing and cascade control up to complex, intermeshed control loops.

Implementation is greatly simplified by user-friendly Engineering Tools with simulation. Thanks to the Tools, users without programming expertise are also able to try out their own ideas, design new control concepts, and test the results in a PC before applying them in a real plant.

The configuration and simulation software for KS 98-1 is now available in one practical package.

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information please email sales@aceg.com.au or visit the A.C.E. website.

Stainless Steel Rotary Encoders designed for Extreme Conditions

Automated Control Engineering Group (A.C.E.) are now distributing the new range of AMCI DuraCoders with stainless steel housings and an IP69K rating for operation in the most extreme conditions. AMCI DuraCoders have a superior shaft load rating; providing a longer life cycle than other encoders and reliably in applications where standard encoders fail.

With a standardIP67 rating and IP69K rated versions available, end-users can take advantage of the DuraCoder’s protection against high pressure and high temperature wash downs; or liquid ingress from long-term immersion in water or contaminants.

• Standard with a 2.5” (63mm) housing
• Oversized double row sealed bearing
• Solid shaft and hub shaft versions are available with a variety of sizing options
• Shaft loadings of up to 100 lbs. (45kg) radial / 50 lbs. (22.5kg) axial
• Available in six versions: SSI, Digital, Analog, Incremental, DeviceNet, and Ethernet/IP

Applications that benefit from the stainless steel DuraCoder design include food/beverage processing, specialty vehicles, cranes, energy generation equipment, chemical/petroleum processing, wastewater treatment plants, offshore/marine environments, steel mills, and many other indoor and outdoor installations. With the ability to withstand the harshest environments, the DuraCoder remains the perfect solution for heavy-duty applications.

For more information about the AMCI range of Encoders and Duracoders please email sales@aceg.com.au or visit the ACE website.

ACE announces IECEx certified pressure sensors from STS

Automated Control Engineering has taken a leading position in the market segment of pressure sensors for hazardous areas with its newly released IECEx sensors from STS.

With compact housings in stainless steel or titanium, measuring ranges of up to 1000 bar and reverse polarity / short circuit protection included, the ATM.ECO/Ex and ATM.1ST/Ex pressure sensors from STS provide the ideal solution for industries where reliable and accurate pressure sensing is required within hazardous areas.

The ATM.ECO/Ex and ATM.1ST/Ex have industry leading specifications that include;

• Up to three times full scale overpressure
• Accuracy of 0.10% FS on the ATM.ECO/Ex and 0.05% FS on the ATM.1ST/EX
• IECEx SEV 10.0003 certification for mining Gas Group 1
• Temperature ranges of up to 150 deg C

With a modular housing design, wide supply voltage range and standard industrial analogue outputs, the STS range of IECEx approved pressure sensors provide an ideal solution for applications within the mining and petrochemical industries.

Automated Control Engineering’s experience in providing process and automation control products to its clients nationally is reflected in the addition of the IECEx sensors to its broad product range.

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information please email sales@aceg.com.au or visit the ACE website.

The new Hengstler Tico 772 – AC Version now available

Automated Control Engineering (ACE) along with Hengstler introduce the new TICO 772 – AC Version to the successful TICO product line of electronic multifunctional counters. The new TICO 772 is the most versatile electronic counter in the market.

The TICO 772 is a superior counter that offers totalizing with presets, time and speed measuring as well as providing control signals. The TICO 772 also offers simple and clear handling.


Features and benefit of the TICO 772:

• Impressive large display of 48x48 mm with 2 line display for easy reading
• Easy handling with only 4 large keys
• Good pressure point, plain text menus
• Signal durations up to 10 minutes
• High input frequency - up to 60 kHz possible, damped 30 Hz
• Increased accuracy in prescaling
• Quick installation

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information please email sales@aceg.com.au or visit the ACE website.

AMCI NR25 EtherNet/IP Absolute Rotary Shaft Encoder

Automated Control Engineering (A.C.E) introduce the new AMCI NR25 Ethernet/IP networked encoder. The NR25 Series is the heavy-duty solution for single-turn and multi-turn position applications requiring serious reliability for today's harshest industrial environments.

AMCI's EtherNet/IP encoders are designed for simple set-up and trouble free performance. The NR25 networked encoders are compatible with all Allen-Bradley & Schneider PLCs and PACs that support EtherNet/IP. Programming via Rockwell Automation's RSLogix software or Schneider's Unity Pro software ensures hassle free integration with your application.

AMCI's NR25 EtherNet/IP encoder comes standard with Power over Ethernet (PoE), making it possible to install this encoder using a single Ethernet cable that transmits data AND power! Your connector and cabling requirements are cut in half, plus installation is simpler and less expensive

The NR25 networked encoder is resolver based and supplies absolute position feedback without glass discs or sensitive LED components, enabling it to withstand high levels of shock and vibration. The IP67 rated housing guarantees protection against dust and water ingress. Add the NR25 EtherNet/IP encoder's impressive shaft load ratings and ruggedness is second to none.

• EtherNet/IP interface with PoE (Power over Ethernet)
• Single-turn Resolution up to 16 bit (65536 counts)
• Multi-turn Resolution up to 30 bit (65536 counts x 16384 revolutions)
• Programmable resolution, count direction, velocity format, & position preset
• Resolver-based durability
• IP67 ingress protection rating
• Solid Shaft and Hub Shaft versions
• ODVA compliant

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information please email sales@aceg.com.au or visit the ACE website.

FEAS Switch-mode Power Supply SNT50 Series (SNT5012, SNT5024)

The newest FEAS product has been released and is now available for national supply from Automated Control Engineering (A.C.E.). The new SNT50 series of switch-mode power supplies are powerful and robust devices used to power sensitive loads in harsh industrial environments. These features result from the modern construction, good radio shielding and high reliability integrated into a functional and stable casing.

The short circuit proof output of this model can be adjusted from 10.0 to 15.5VDC for the SNT5012, and from 22.5 to 30.0VDC for the SNT5024. This power supply is optimally suited for loads requiring high starting currents.

The SNT50 series products are all completely embedded with resin in an aluminium housing for mounting on a rail or panel.

Features:

- Switch-mode controller with low residual ripple

- Output separated according to VDE00551

- Overload and open circuit protected, short circuit proof

- Parallel operation possible to increase output power

- Operating status shown by LED

- Suitable for the tropics – epoxy resin casted

- Input voltage 85-270AC or 120-400DC

- Safety acc. To VDE, EN, UL, CSA

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information please email sales@aceg.com.au or visit the ACE website.

ASM launches the PRAS5 range of Heavy Duty Rotary Position Sensors with rugged housing for harsh environments

Heavy duty applications require products from companies that are reputed for their quality, reliability and attention to detail. This is why ASM has developed the NEW range of PRAS5 Heavy Duty Hall Effect Sensors with a measuring range of 0 - 360° and sealing up to IP69K. Automated Control Engineering (A.C.E.) are the exclusive national distributor for the new PRAS5 range.

Whenever a rotary sensor is to be used for a “Harsh Outside” application such as “Mobile Hydraulics”, “Wind Turbines” or “Offshore Applications” the sensor is expected to be impervious to the environmental conditions as well as the harsh application requirements. These include wide temperature fluctuations and sealing against water and debris.

This latest range from ASM, the PRAS5 family is available with either a stainless steel or aluminium housing which has been designed to allow the sensor to run continuously under these demanding conditions. The PRAS5 incorporates “Hall” sensing technology and is available with a 10mm output shaft or alternatively magnetically coupled via an independent magnet giving a true non contact measuring system. M8 fixings meet the heavy duty installation requirements with a temperature capability from - 40ºC to an optional + 120ºC. The PRAS5 can be ordered in angular increments of 15º and the rugged design has been tested for 100g/11ms shock and 20g vibration

A wide range of electrical outputs are available including 0.5 – 10V, 4-20mA along with a choice of CANBus outputs including CANopen and J1939.

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information about the PRAS5 Series from ASM, please contact the ACE staff via email at sales@aceg.com.au or visit the ACE website.

Absolute + Incremental Encoder – combined in one enclosure!

The ACURO® family of encoders made by Hengstler, and distributed nationally by Automated Control Engineering (ACE), has been expanded with the addition of the new AC58-I; an encoder that can be used both for positioning and feedback applications.

In many drive and positioning applications, electric motors are frequently used, with an incremental encoder assuming the feedback and absolute encoders assuming the rotor positioning. Up until now, two encoders had to be integrated in order to attain the desired output signals. The use of 2 encoders not only increased the overall system cost, but narrowed the freedom of engineers in their constructive design.

Two in One!
With the new AC58-I, Hengstler now offers two encoders in one! Incremental and absolute encoder signals are combined together in one enclosure.

The benefits at a glance:

• Reduced costs and smaller footprint


• Absolute and incremental signals are combined in one enclosure


• Suitable for a wide range of climatic conditions


• Offering a wide temperature range from -40 °C to 100 °C


• Reverse-compatible with all common types of frequency converters


• Square-wave TTL or HTL signals are available


• High system accuracy


• Resolution of up to 29 bit, up to 2048 increments


• Interference immunity


• Offering high electromagnetic compatibility (up to 2 kV)


• Non-susceptible to magnetic interference


• Thanks to fully optical scanning


• Minimized installation time and costs


• One connecting cable is all you need.

Automated Control Engineering Group Pty Ltd (A.C.E.) specialises in the national supply of process and automation control equipment to a diverse range of industries that encompass the water, industrial, food, mining and petrochemical markets. A.C.E. prides itself on being able to supply the client with an exclusive range of products from major international suppliers that include AMCi, STS, Weber, Vacon, West Instruments, ASM, Hiquel, Kiepe, Hengstler, Conductix-Wampfler, Monitouch, Hawk, TransTech, FEAS and Pepperl + Fuchs.

For more information about Hengstler products or any other products ACE supply, please email the staff at sales@aceg.com.au or visit the ACE website.

The new K-System signal conditioners from Pepperl+Fuchs are not just characterized by their new and clear design engineered for utmost convenience and usability. Ranging from switch amplifiers to highly functional signal converters, they feature galvanically isolated signal transmission for the utmost in precision and safety. The new K-System signal conditioners are distributed regionally by Automated Control Engineering (ACE).

With the variety of process control systems available, it is often necessary to convert an input signal into a format that the system will accept. Signal conditioners take signals from an assortment of field sensors such as thermocouples and RTDs, and convert those signals into any of several standard instrument signals (1…5V, 4…20 mA, etc.).

Signal conditioners are also beneficial to the accurate transfer of these signals, isolation and the elimination of ground loops. Additionally, signal conditioners are
· Easy to specify
· Easy to integrate
· Easy to expand

One main function of signal conditioners is to prevent the effects of interference voltage and current through the use of galvanic isolation. This eliminates grounding problems of wide network signal cables. Signal conditioners offer much more than just this isolating function. This includes additional functions, like linearization and sensor supply as well as sensor and line fault detection.

Many signal conditioners have additional relay outputs in order to report min/max trip values. K-System signal conditioners are mounted on the DIN mounting rail. If the Power Rail is used, the wiring needed for the supply voltage and collective error messages is reduced significantly.

For more infromation about the Pepperl+Fuchs K-System Signal Conditioner or any other products supplied by ACE please visit the ACE website or email the staff at ACE on sales@aceg.com.au

The New STS Water Manager – the entire network solution

Automated Control Engineering and STS introduce the new Water Manager. This latest release from STS provides multiple features and benefits to ensure optimal functionality.

The STS Water Manager features and benefits:

• Managing data loggers and reading recorded data from any location at any time.



• Automatic generation of a warning message if an out-of-limits condition occurs.
  Highly flexible and cost-efficient monitoring of water levels and temperatures of rivers and lakes.
  
  
• Communication for reading data and configuring the system occurs via GSM/GPRS and radio (433 MHz).



• Registers water levels of 0 to 250 m and temperatures of -5 to +80°C.
  
  

The measuring hardware for GSM/GPRS and radio may be easily installed in a 50mm-tube or 100mm-tube. It consists of two elements:

• A highly accurate pressure and temperature sensor with stainless steel or titanium casing exhibiting a 0.1% accuracy of the end-scale value as regards pressure/water level and a 0.3°C accuracy with regard to temperature.
  


• Data logger equipped with a memory able to store up to 250.000 values / automatic monitoring of its operating conditions / measurement interval may be set at 2s to 12 h

The WEB Water Manager software offers a clear overview of all data loggers. In addition, it enables their configuration and monitoring of measuring data. Data may be downloaded directly into the customised analysis software or an Excel spreadsheet.

For more infromation about the STS Water Manager email the ACE staff on sales@aceg.com.au or visit the ACE website.

FEAS Power supply with integrated Buffer module SSE90

Short duration voltage drops in line supply, generated by an overload or by switching operations, are often the reason for momentary interruptions of the DC supply. If the DC Circuit is not buffered, the consequence may be a serious system crash or other system malfunction.

FEAS has created a solution for this problem with the new FEAS SSE90, distributed nationally by Automated Control Engineering Group (ACE). FEAS combined the advantages of a modern and compact switch-mode power supply with a maintenance-free buffer-module which uses high capacity double layer capacitors as storage elements to create the SSE90.

This feature offers the user many benefits compared to battery buffering, such as periodic replacing of batteries being no longer necessary and no gas discharge as with batteries removing the need for additional ventilation. Also due to the short charging time, the SSE90 is rapidly ready for buffering again after a line interruption.

The compact design of this buffer module is especially made for a space-saving, DIN-rail mounting. Total encapsulation with a special resin makes the device shockproof and suitable for a tropical environment. This high industrial quality, along with the wide operating temperature range, allows for applications in many fields.

- Special Advantages of the SSE90
- Maintenance-free operation
- No battery used
- Parallel connection possible
- Wide range input 85 – 270Vac
- Suitable for tropical environment
- Short circuit and overload proof
- Remote monitoring by Relay
- High storage capacity
- Safety acc. to VDE, EN. UL,CSA

For more information about the FEAS SSE90 or other FEAS products please visit the ACE website or email the ACE staff sales@aceg.com.au

ACE INTRODUCE THE WORLDS THINNEST MAGNETOSTRICTIVE SENSOR FROM ASM

Automated Control Engineering (ACE) and ASM launch the new PCFP25 series of slim line Magnetostrictive sensors to compliment the existing “POSICHRON®” range. The PCFP25 is a slim, non-contact linear position sensor using Magnetostrictive sensing technology which has been specifically designed for harsh applications with limited space. With a profile of only 8mm x 28mm it can fit into areas that were previously inaccessible.

The PCFP25 is an industrial grade sensor which has been designed to be maintenance free due to the non-contact Magnetostrictive sensing technology which is also highly resistant to shocks and vibration. Due to the very small profile of the sensors they can also be used for safety critical applications where two PCFP25 units can be mounted together, either vertically or horizontally to provide two totally independent redundant outputs.

POSICHRON® represents a complete family of non-contact linear position sensors and the addition of the new PCFP25 extends the application ranges to areas with limited access or that are safety critical. This series of sensors offer a range of absolute analogue outputs of 0-10VDC and 4-20mA as well as CAN-bus versions and can be supplied in stroke lengths from 100mm to 5500mm in increments of 10mm.


For more information about the PCFP25 or other products supplied by ACE please contact the ACE staff on sales@aceg.com.au or visit the Automated Control Engineering Website.

The New Pepperl+Fuchs WirelessHART - Wireless Communication Systems make Communication Easy

Automated Control Engineering (ACE) introduces the new WirelessHART components from Pepperl+Fuchs - free communication from the need of wires, while integrating conventional field devices into the wireless world. With the WirelessHART standard, wireless communication is now reaching the process automation world. WirelessHART is based on the established HART protocol, which makes it easy to integrate it into any existing fieldbus infrastructure and uses a 2.4 GHz band as a transfer medium for several radio technologies.

WirelessHART™:
· Is an open and interoperative standard
· Is based upon the established HART protocol
· Uses known tools and procedures for configuration, maintenance and diagnosis
· Allows wireless access to existing field devices

WirelessHART uses a flat mesh network where all radio stations (field devices) form a network. Every participating station serves simultaneously as a signal source and a repeater. The original transmitter sends a message to its nearest neighbor, which passes the message on until the message reaches the base station and the actual receiver.

In addition, alternative routes are set up in the initialization phase. If the message cannot be transmitted on a particular path, due to an obstacle or a defective receiver, the message is automatically passed to an alternative route. So, in addition to extending the range of the network, the flat mesh network provides redundant communication routes to increase reliability.

The communication in the Wireless Network is coordinated with TDMA (Time Division Multiple Access), which synchronizes the network participants in 10 ms timeframes. To avoid jamming, WirelessHART uses also FHSS (Frequency Hopping Spread Spectrum). All 15 channels as defined in IEEE802.15.4 are used in parallel; WirelessHART uses FHSS to “hop” across these channels. Channels that are already in use are blacked out to avoid collisions with other wireless communication systems.

The combination of 10s synchronization and 15 channels allows 1500 communications per second.



For more information about the P+F WirelessHART please email on the ACE staff sales@aceg.com.au or visit the ACE website.

Rugged, compact, reliable ACURO-XR® Series Encoders

Automated Control Engineering (ACE) presents it new product in which it nationally distributes - the new expanded series of Hengstler ACURO-XR® absolute encoders. Expansion of the range was completed by integrating state-of-the-art, wear-free and highly reliable multi-turn technology into the products.



Encoders of the new ACURO-XR® series are reliable partners for applications under harsh operating conditions and they are capable of withstanding high acceleration rates, mechanical stresses, extreme climatic fluctuations and are fully functional in underwater operating conditions.

The ACURO-XR® series is characterised by an extraordinarily rugged mechanical design, highest reliability and a long useful life. Its highly robust enclosure and generously dimensioned bearing easily cope with high axial and radial forces of up to 300N. The PCB with evaluation electronics, sensor asic and electronic multi-turn features multiple fastening and protection against humidity, corrosion and contact breakage. Extremely high shock accelerations up to 2,000 m/s² and vibrations up to 200 m/s² are no problem for ACURO-XR®.

A high-grade sealing concept protects the encoder against penetrating liquids (IP69k). 12-bit resolution is achieved within one turn, and the encoder is equipped with new, electronic multi-turn technology to detect and output the number of rotations. It works with energy-independence, without any gears and contacts, without any moving parts, and without the use of batteries.

The max. multi-turn resolution has been increased to 24 bits.

ACURO-XR® is accommodated in a compact 58-mm industrial-standard enclosure and excels by its extremely small installation depth of only 32 mm. Its wide temperature range, reaching from -40 to +100 °C, makes it suitable for a virtually unlimited field of applications.

Being suitable for any type of connection, ACURO-XR® presents an extremely reliable and durable encoder solution for heavy-duty and outdoor applications.

Find out more about the ACURO-XR Encoders by emailing our staff at ACE on sales@aceg.com.au or visit our website.

Conductix Wampfler - mobile power & data trsnmission

Conductix-Wampfler products are regionally distributed by Automated Control Engineering (ACE). Conductix-Wampfler is an organisation whose core strengths lie in the development and production of reliable solutions for applications relating to mobile power and data transmission.

Industries that utilise the Conductix-Wampfler product range include the mining, OEM and water industries.

Products that are available from Conductix-Wampfler include festoon systems, conductor rails, energy guiding chains, motorized cable reels, spring cable reels, slip ring bodies and contact-less power transmission systems.

Staff at ACE can provide you with more information for applications where Conductix-Wampfler can be used. Contact us via email sales@aceg.com.au or visit our website.

Transtech - signal conditioners & electronic surge protection

Automated Control Engineering (ACE) distribute regionally Transtech Electronic Controls Pty Ltd products. Transtech is a 100% Australian owned and operated designer and manufacturer of electronic, instrumentation and process controls products, with a main focus on signal conditioners & electronic surge protection.

Transtech specialise in the Industrial, Petro-Chemical, Oil & Gas, Mining and Public Sector Utilities markets.

Transtech Electronic Controls has well established research and development, production and technical support departments staffed by people who have been designing and supplying Transtech products for over 20 years. These product include electronic transient/surge protection equipment and analogue signal conditioners, loop repeater/isolation modules, trip units and special application process control modules.

TransTech offers fully tested and quality guaranteed products compliant to ISO 9001:2000 and which conform to the latest standards such as IEEE C.62.41:2004 for Cat A,B,C transient protectors.

Our staff at ACE can tell you more about Transtech products, email us sales@aceg.com.au, or why not visit our website.

Monitouch - operator interface screens, distributed by ACE

Automated Control Engineering (ACE) are regional distributors for Monitouch products - operator interface screens. Monitouch manufactures powerful, innovative and quality products that give the user advanced capabilities for remote monitoring and control of their manufacturing and industrial processes.

Monitouch products have touch screens ranging from 6" to 15" HMI, the screens have a wide range of graphic, video and data capabilities while also having the feature of Internet connectivity. Supporting most serial/Ethernet protocols as standard, and boasting drivers for a large range of external devices that include PLCs and barcode readers, Monitouch products include the most in-demand industry features. The Monitouch screens also enable remote data collection and transfer of parameter data in a reliable, affordable and user-friendly package.

Need more information? contact our staff at ACE vis email sales@aceg.com.au or visit our website.

Automated Control Engineering (ACE) is a regional distributor of Kiepe products - conveyor control and monitoring. Within the bulk material industry, Kiepe is known as a leading manufacturer of high quality devices that are used to monitor and control belt conveyor facilities. Kiepe cover a complete range of conveyor safety control equipment for speed monitoring, belt tear, emergency stop, belt wander and bucket elevator monitoring.

Kiepe's products are built to be reliable and of superior quality, which is necessary to handle the demanding and harsh Australian environmental conditions. Decades of experience and consistent product development are the basis for the high quality and reliability of the products.


Further information regarding Kiepe can be found on our website or you can contact our staff at ACE via email sales@aceg.com.au

ACE - Regional distibutor of Hawk Level, Positioing and Flow Sensors

Automated Control Engineering (ACE) and Hawk Measurement Systems Pty Ltd (Hawk) regionally supply customers with level, positioning and flow sensors. Hawk is an Australian manufacturer that was established in 1988 to produce a range of ultrasonic sensors that monitor level and flow applications across a wide range of process industries.


Hawk believe strongly in research and development, ensuring that it can offer products that continue with the success that it has achieved in the application of level measurement technology.

Hawk is supplied to various industries including the mining industry, water industry, agricultural and manufacturing industries. Hawk has gained a wealth of application knowledge that it draws upon to provide the client with reliable level control solutions.


ACE staff can provide you with more details about Hawk products and applications, contact us via email sales@aceg.com.au or visit our website.

Vacon Variable Speeds and Drives - distributed by ACE

Automated Control Engineering (ACE) is a regional distributor for Vacon - the largest and fastest growing AC Drives Manufacturer in the world - Vacon have a 100% focus to design, manufacture, sell and support only the best AC Drives.

in the variable speed drive market, Vacon are ambitious to meet the most demanding needs of clients. Vacon seeks top performance, easiness, and reliability with all AC Drive products. Vacon produce energy-saving products that improve process performance and reduce environmental load in major industries including Mining, Marine, HVAC, Water and Pulp and Paper. Applications range from: - 0.1kW-5.3MW in air-cooled and liquid cooled configurations - industry leading solutions for harmonics management and mitigation - energy and process optimisation - offerings for renewable energy.

Vacon’s continuous research and development of class leading products ensures the greatest competence in drive applications available on the market today.

ACE can provide you with more information on the Vacon range of variable speed drives, contact via email sales@aceg.com.au or visit our website.

Stainless Steel Resolvers Designed for Extreme Duty and Food Grade Applications

AMCI and Automated Control Engineering Group (ACE) realise the need for extreme-duty sensor feedback in harsh industrial environments, and in response, provide a family of stainless steel resolver transducers.

Options include 303 or 304 stainless steel housing and shaft, and a variety of mounting styles. The IP67 rated product line comes standard with either a 1/4", 3/8”, or 5/8” stainless steel shaft and an oversized double row sealed bearing. The input shaft in each of these stainless steel resolvers extends through the internal core of the resolver rotor windings. This one-piece rotor design eliminates internal coupling components, increases shaft strength and maximizes reliability.

Durability was the highest priority when designing AMCI’s stainless steel resolver transducer family. The optional 5/8” stainless steel shaft boasts exceptional shaft loading, and the high temperature rating up to 150°C (302°F) provides reliability where most sensors fail. Mechanically connected to the shaft of the controlled machine, these transducers are subject to severe conditions such as vibration, mechanical shock and possibly contaminates such as coolants, caustic vapors and salt water mist. For food and beverage applications where sanitizing wash downs are required, the stainless steel housing and robust IP67 rating will withstand all hose spray and cleaning solutions.

High performance applications like those found in paper factories, steel mills, ship loading, and mining applications are the inspiration for these extreme-duty rotary sensors. AMCI also considered food grade requirements when designing these resolvers. The non-porous nature of stainless steel will not support growth of mold, mildew, or bacteria. This provides a hygienic, easy to clean solution for customers manufacturing, processing, or packaging food.

For more information please contact us at ACE sales@aceg.com.au or visit our website.